See more products
     
  ECPD SERIES Single phase



Diverter protectors  > Single phase  > Submodels: ECP SERIES Single phase
  Connection diagram
..............................................
  print
  pdf product
ECP SERIES Single phase


FOR EXPOSED AREAS
Primary protective devices single phase ECP- Series, diverter type, provide an effective protection against transients and disturbances over the electric power sources, either in Normal Mode (Disturbances between phases or between phase and neutral, also called Differential Mode) or Common Mode (Disturbances between Phase and Ground, and between neutral and Ground). Besides, it attenuates high and low energy transients generated by atmospheric discharges.
ECP- Series filters act as primary protectors, complying with B and C categories according to IEEE C6241 normative.



Characteristics
Current discharge
from 20 to 100KA wave 8/20Ásec.

Failure and state indicators
State (Blue Led) (Optional), Failure (Red Led)

Remote alarm
NA/NC Dry contact - (Optional)

Warranty
5 years
 

Technical Specification

Connection
Parallel

Operating voltage
120 / 220 VCA +/- 20%

Operating frecuency
47- 63Hz

Current discharge capability
20 - 40 - 80 - 100KA (wave 8/20Áseg)

Models


Response time
<5 nanosecs

Operating temperature
-40 a + 60░C

Humidity
5% to 85% Non condensed

Cabinet
Vacuum impregnated magnetics, epoxy encapsulated, high impact plastic case

Weight
150 gr

Measures
100 x 74 x 32 mm


............................................................................................................................................................