Active Line Filters  > Secondary Protection  > Submodels: ECM SERIES
  Connection diagram
..............................................
  print
  pdf product
ECM SERIES


INDUSTRY APPLICATION
The protective device with active line filter ECM - Series offers an efficient protection against transients, spikes and noise that are the electric power feeding lines, either in Normal Mode (Disturbances between phases or between phase and neutral, also called Differential Mode) or Common Mode (Disturbances between Phase and Ground, and between neutral and Ground). The active filter permanently monitors the wave shape instantly responding to the eventual detection of any transient.
ECM - Series act as a primary and secondary protector, covering the IEEE C6241 A, B and
C categories.



Characteristics
Transient reduction
50dB minimum from the audio médium band, up to 50 Mhz

Supression performance
+/- 2 volts transients and spikes, at any point of the sine wave

Current discharge
45KA (wave 8/20µseg.)

State indicator
High luminosity (Blue Led)

Remote alarm
NA/NC Dry contacts (Optional)

Warranty
10 years


IEC 60950-1 2001
 

Technical Specification

Connection
Series

Operating voltage
110 / 220VCA y de 0 a 100VDC +/- 20%

Operating frecuency
47- 63Hz.

Load current
2A - 5A - 7A - 10A - 15A - 20A - 30A

Models


Load stability
Better than 1% from work without load to maximum load. (+10%, -20% of the line voltage)

Crest factor
The system is appropriate for non-lineal load, with crest factor above 3,0.

Current discharge capability
45KA (wave 8/20µseg)

Response time
<5 nanosecs

Operating temperature
-40 a + 45°C

Humidity
5% to 85% Non condensed

Cabinet
Fireproof, high impact plastic Case, epoxy encapsulated

Weight
2,2 Kg to 3,04 Kg

Measures
170 x 70 x 140 mm
210 x 70 x 140 mm
250 x 70 x 140 mm


............................................................................................................................................................