Telephony, voice, data & coaxial  > Data Frames E1 at 120 Ω  > Submodels: EC-TD1 SERIES
  Connection diagram
..............................................
  print
  pdf product
EC-TD1 SERIES


SPECIAL FOR DATA AND VOICE LINES
Secondary protective devices EC-TD1, bare primary and secondary protection, and its used for telecommunications, applied to digital data frames, data transport, and telephone lines.
The protection consists of three stages, gas microcapsules (primary protection), solid state fuses
(secondary protection), and solid state semiconductors (Silicon Avalanche technology).
The Polyswitch reseteable fuses ľ PTCs work by changing from high impedance to extreme low impedance when it detects the presence of any electric disturbance, until it addresses it to Ground. Then it changes back to the initial state, when the disturbance has ceased.
The packaging has been developed to fit the M1-50 split block as a standard base, replacing the
bridging clips.
The Ground kit (rail) needs to be added for each M1-50 base that will be used.



Characteristics

Special for data frames, voice lines, data lines, telephony, alarms, etc.

Current discharge
5 KA (wave 8/20Áseg)

Warranty
5 years
 

Technical Specification

Protection mode
Line - Line / Line - Ground

Current discharge capability
5KA (wave 8/20Áseg)

Response time
<1 nanosecs

Operating temperature
-40 to + 45░C

Humidity
5% to 85% Non condensed

Cabinet
High impact plastic case


............................................................................................................................................................