 |
|
|
EC SERIES |
|
|
ACTIVE LINE FILTER
The protective device with active line filter, three phase EC- Series offers an efficient protection against transients, spikes and noise that are the electric power lines, either in Normal Mode (Disturbances between phases or between phase and neutral, also called Differential Mode) or Common Mode (Disturbances between Phase and Ground, and between neutral and Ground). The active filter permanently monitors the wave shape instantly responding to the eventual detection of any transient.
EC- Series act as a primary and secondary protector, covering the IEEE C6241 A, B & C categories.
|
Characteristics |
 |
 |
Transient reduction
50dB minimum from the audio médium band, up to 50 Mhz.
Supression performance
+/- 2 volts transients and spikes, at any point of the sine wave
Current discharge
65KA (wave 8/20µsec)
State indicator
State (Blue Led), Failure (Red led)
Warranty
10 years
|
|
Technical Specification |
 |
 |
Connection
Series
Operating voltage
120 / 220 VCA +/- 20%
Operating frecuency
47- 63Hz
Models
EC-X30 / EC-X50 / EC-X100 / EC-X200
X = Tensión de Corriente Alterna
ECDC-XX30 / ECDC-XX50 / ECDC-XX100 ECDC-XX200
XX = Tensión de Corriente Continua
Load current
30A - 50A - 100A - 200A
Load stability
Better than 1% from work without load to maximum load. (+10%, -20% of the line voltage)
Crest factor
The system is appropriate for non-lineal load, with crest factor above 3,0.
Discharge current capability
65KA (wave 8/20µsec)
Response time
<5 nanosecs
Operating temperature
-40 to + 45°C
Humidity
5% to 85% Non condensed
Cabinet
Outdoor apt, reinforced metal cabinet with door.
Weight
12 Kg
Measures
380 x 380 x 210 mm
|
............................................................................................................................................................ |
|
 |