WIRED AND WIRELESS DATA NETWORKS
Secondary protective devices EC-Net-1 Series are specifically designed to protect data transport over wired and wireless networks, as UTP structured wirings 5 and 5e categories.
The elements that compose the product are designed to offer an effective secondary protection, consisting of solid state components, and two protective stages of great power and of fast response.
The devices deviate the random transients, induced over the UTP cables.
RJ-45 connectors for data input and output.
The deviation system consists of a Green/Yellow cable for connection to Ground.

Secondary protective devices EC-Net-1 Series are specifically designed to protect data transport over wired and wireless networks, as UTP structured wirings 5 and 5e categories.
The elements that compose the product are designed to offer an effective secondary protection, consisting of solid state components, and two protective stages of great power and of fast response.
The devices deviate the random transients, induced over the UTP cables.
RJ-45 connectors for data input and output. Cabinet with 4 units.
The deviation system consists of a Green/Yellow cable for connection to Ground.

SPECIAL FOR DATA AND VOICE LINES
Secondary protective devices EC-TD1, bare primary and secondary protection, and its used for telecommunications, applied to digital data frames, data transport, and telephone lines.
The protection consists of three stages, gas microcapsules (primary protection), solid state fuses
(secondary protection), and solid state semiconductors (Silicon Avalanche technology).
The Polyswitch reseteable fuses – PTCs work by changing from high impedance to extreme low impedance when it detects the presence of any electric disturbance, until it addresses it to Ground. Then it changes back to the initial state, when the disturbance has ceased.
The packaging has been developed to fit the M1-50 split block as a standard base, replacing the
bridging clips.
The Ground kit (rail) needs to be added for each M1-50 base that will be used.

WIRED AND WIRELESS DATA NETWORKS
Secondary protective devices EC-POENet-1 Series are designed to protect data transport and power source over Power Over Ethernet networks, as UTP structured wirings 5 and 5e categories, according to the EIA/TIA 568 A/B normative. The elements that compose the product are designed to offer an effective secondary protection, consisting of solid state components, and two protective stages of great power and of fast response, and a special protection over Vcc. The devices deviate the random transients, induced over the UTP cables. RJ-45 connectors for data input and output.
The deviation system consists of a Green/Yellow cable for connection to Ground.

SPECIAL FOR DATA FRAME
Secondary protective devices EC-CXTD-1 are coaxial protectors, developed to offer an effective protection over digital data frames.
EC-CXTD-1 have automatic recovery, and operate by deviating to Ground the transients that are
induced over the coaxial cables, avoiding the disturbances to affect the electronic equipment.
The product presentation was specially developed for an easy installation, due to a perforated
aluminum flange.
Provides Ground connection, a special screw allows to connect a Ground terminal.

SPECIAL FOR TELECOMMUNICATION SYSTEMS
Secondary protective devices EC-CX-IODU are coaxial protectors designed to offer an effective
protection over communication systems with ODUs and IDUs (Outdoor and indoor units).
EC-CX-IODU devices automatically recover from an event, and operate by deviating to Ground the transients that are induced over the coaxial cables, avoiding the disturbances to affect the ODUs
and IDUs.
The product presentation was specially developed for an easy installation, due to a perforated aluminum flange.
Provides Ground connection, a special screw allows to connect a Ground terminal.

SPECIAL FOR TELECOMMUNICATION EQUIPMENT
Secondary protective devices EC-CXN, EC-CXU, are coaxial protectors developed to offer an effective protection over the communication equipment.
EC-CXN and EC-CXU have automatic recovery, and operate by deviating to Ground the transients that are induced over the coaxial cables, avoiding the disturbances to affect the equipment.
The product presentation was specially developed for an easy installation, due to a perforated aluminum flange.
Provides Ground connection, a special screw allows to connect a Ground terminal.

VIDEO NETWORK
Secondary protective devices EC-CXTV Series are specifically designed to protect video
signal transport over wired and wireless installations, as: CATV, CCTV, Data and Voice transmission networks.
The elements that compose the product are designed to offer an effective secondary protection, consisting of two protective stages, one of great power and another of fast response.
The devices deviate the random transients, induced over the coaxial cables.
The deviation system consists of a special screw or even the aluminium flange, to be connected to Ground.

zzprueba e descr